background image

en 

Troubleshooting

40

Fault

Cause

Troubleshooting

E:90-01 will light up altern-
ately.

Mains voltage is too low.

This is not a fault on the appliance.

1.

Contact an electrician.

2.

Have the mains voltage and elec-
trical installation checked by an
electrician.

A different error code ap-
pears in the display window.
E:01-00 to E:90-10

A technical fault is present.

1.

Press  .

2.

Unplug the appliance or switch off
the fuse.

3.

Wait at least 2 minutes.

4.

Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.

5.

Switch the appliance on.

6.

If the problem occurs again:

Press  ⁠.

Turn off the water tap.

Pull out the mains plug.

Contact "Customer Service"

→ 

Page 51

 and give the er-

ror code.

Washing results

Fault

Cause

Troubleshooting

Tableware is not dry.

No rinse aid used or dosage
set too low.

1.

Add "Rinse aid" 

→ 

Page 25

.

2.

Set the amount of rinse aid to be
dispensed. 

→ 

"Setting the amount of rinse aid",

Page 25

Programme or programme
option has no drying phase,
or the drying phase is too
brief.

"Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme." 

→ 

Page 17

Some option buttons decrease the
drying result, e.g varioSpeed.

Summary of Contents for SE73HX42VG

























































Reviews: