NL Troubleshooting
Malfunction
Cause
Troubleshooting
Insides of the appliance
are wet after the wash
cycle.
No malfunction. For
condensation drying, water
No action required. No action
required.
drops in the rinse aid
container are necessary and
desirable. The moisture in
the air condenses on the
inner walls of the appliance,
flows downwards and is
pumped out.
Food remains on the
crockery.
Crockery is placed too
close together or the
basket is too full.
1.
Arrange the crockery with sufficient
space between them.
The spray jets must be able to
reach the surface of the
dishes.
2.
Avoid touch points.
Spray arms cannot
rotate freely.
▶
Arrange the crockery in such a way that it
dishes do not interfere with the
rotation of the spray arm.
Spray arm nozzles are
clogged.
▶
Clean the "spray arms"
The seven are polluted.
▶
Clean the sieves.
The strainers are incorrectly
fitted and/or not secured.
1.
Apply the sieves properly.
2.
Secure the seven.
Washing program too weak
chosen.
▶
Select a more powerful rinse program
mom.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
High, narrow items of
crockery are insufficiently
spread out in the corners.
flushed.
▶
Ample high, narrow pieces of crockery
well not too oblique and not in the
corners.
The upper basket is not
set to the same height
on the right and left.
▶
Upper basket left and
right to the same height.
44
