Siemens SENTRON 3VA1 Manual Download

Page: 424 / 676

Accessories

4.8 Residual current devices

3VA molded case circuit breakers with IEC certificate

422

Manual, 03/2019, A5E03603177010-03

Sealable protective covers of the residual current device

①

Contact hazard protective cover over main current paths and auxiliary contacts

②

Transparent protective cover over setting buttons

Transparent protective cover over setting buttons
In order to prevent unauthorized access to the setting buttons for I

Δn

and Δt, the transparent

cover over the settings buttons can be optionally sealed.

Note
In order to protect personnel, it is necessary to seal the transparent protective cover so that

the 30 mA setting range cannot be changed.

Contact hazard protective cover over main current paths and auxiliary contacts including

sealing option
After the residual current device RCD320 or RCD520 has been mounted on the 3VA1

molded case circuit breaker, a contact hazard protective cover is installed over the main

current paths to protect against direct contact. This cover can be sealed optionally in order to

block any attempt to dismantle the residual current device from the molded case circuit

breaker.

Summary of Contents for SENTRON 3VA1





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands

Siemens SENTRON 3VA1, Manual

Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands