Siemens SENTRON 3VA1 Manual Download

Page: 363 / 676

Accessories

4.7 Locking and interlocking

3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03

361

Locking a molded case circuit breaker in the ON (I) position

It is also possible to safely lock a 3VA molded case circuit breaker in the ON (I) position

using a padlock device. The breaker contacts cannot be opened when it is locked in this

position. A 3VA molded case circuit breaker can be released from its ON position again only

by an authorized person.
The TRIP function, i.e. the protective functionality of the 3VA molded case circuit breaker, is

not affected by locking the breaker in the ON (I) position. In the event of a fault, the 3VA

molded case circuit breaker trips in the normal way.

4.7.1.2

Interlocking

The available interlocking devices can be used to implement a mutual interlock between at

least two 3VA molded case circuit breakers.
The interlocking device only ever releases one 3VA molded case circuit breaker at a time,

thereby ensuring that only the released circuit breaker can be operated. All other 3VA

molded case circuit breakers remain in the safe OFF (O) position and are blocked by the

interlock.

Summary of Contents for SENTRON 3VA1





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands

Siemens SENTRON 3VA1, Manual

Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands