background image

en

29

Waste disposal

Disposal

Old appliances are not worthless rubbish.
Valuable raw materials can be reclaimed
by recycling old appliances.
Pull out the mains plug of the redundant
appliance. Cut off the power cord and
discard with mains plug.
To prevent children from locking
themselves in the appliance and
suffocating, destroy the door lock
and childproof lock (if fitted).
You received your new appliance in
a protective shipping carton. All packaging
materials are environmentally friendly and
recyclable.
Please contribute to a better environment
by disposing of packaging materials in an
environmentally-friendly manner. All plastic
parts of the appliance are identified by
internationally standardised symbols
(e.g. >PS< polystyrene).
When the appliance is being disposed of,
the plastic waste can be sorted for
environmentally-friendly recycling.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
Keep children away from shipping carton
and packaging components. Danger of
suffocation from folding cartons and plastic
film.

Disposal of the packaging

Please dispose of the packaging
material in an environmentally
friendly manner.

Corrugated cardboard consists
mainly of wastepaper.

The moulded polystyrene parts do
not contain any
chlorofluorohydrocarbons.

The polyethylene film (PE) consists
partly of secondary raw materials.

The wooden frames (if fitted) are
made of untreated residual wood.

The hoops (if fitted) consist
of polypropylene (PP).

Disposal of redundant
appliances

Make redundant appliances unusable
to prevent subsequent accidents.
Dispose of the appliance in an
environmentally friendly manner.

Warning

Children could become locked in the
appliance (risk of suffocation) or find
themselves in other dangerous situations.
Therefore: Pull out the mains plug, sever
and dispose of the power cord.
Destroy the door lock so that the door
can no longer be closed.

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for SF 65T350

































Reviews: