Siemens signia easyTek, How-To Manual

3

u

  While green LED is flashing 

, close battery door of hearing 

instruments

u

  Pairing is complete when green LED stops flashing (audible alert) – 

easyTek is ready to use

Note with initial activation only:  Blue light will now flash 

 to 

allow for pairing of Bluetooth phone.  If phone is not present, press 
MFB to stop blue light flashing and end pairing search.

Pairing Siemens transmitters 

Before first use

•  Charge transmitter before first use by connecting the transmitter 

with the power plug to a power supply.

•  The LED shines red while charging.
•  Charging time is about 5 hours.
• Make sure that a hearing aid that has been paired is turned on.
 •  Every Siemens transmitter must be paired once with easyTek. 

You can use up to two Siemens transmitters.

u

  Turn on easyTek and Siemens transmitters.

u

  Press MFB 

, 

 and 

 simultaneously

 for about 5 seconds; 

and 

 LED’s flash 

u

 easyTek LED flashing,  then “on” – transmitter LED flashing, then 
solid blue 

. Your easyTek has been paired to the transmitter.

Remote control functions

u

  Volume changes: Press 

 or 

 <1 second to adjust step  

by step or press and hold until desired volume is reached.

u

  Hearing program changes: Press and release 

 1-2 seconds until 

desired program is reached. (This function is not available during 
audio streaming, for example when you are using easyTek to listen 
to the TV or to music through your MP3 player.)

u

  Turn on/off (standby): Press 

 and 

 simultaneously  

for >3 seconds. easyTek will then turn off.