SIJECT OP15B Screens
SIJECT 15/16 Operation Manual June, 2003
3-30
Fig 3-25
Service screen 1.2 --- Save/load screen
Operating sequences
Press softkey F4
to enter save/load screen. The PLC/menus/CSP
can be saved/loaded to/from MMC.
Program types
--- User can select PLC, menus or CSP.
MMC PLC version
--- displayed value. Press softkey F2 “PLC version”
to show the PLC version in MMC.
Operating examples
To select Menus in Program types. Steps are as follows:
1. Press cursor key
or
to enter program type selection;
2.
Press
Selection
Key
, and the cursor moves to the left;
3. Press cursor key
or
to select “Menus”;
4. Press Enter Key to confirm.
Download Menus from MMC. Steps are as follows:
1. Plug in MMC card in the CI;
2. Select “Menus” in Program Type;
3. Press softkey F4
to start data transfer;
4. Restart the system after the transfer process is finished. The operation
is over.
