Getting Started
2-11
Distributed I/O Device ET 200M
EWA-4NEB780600602-06
2.10
Diagnostics
1. If a fault occurs, the OB 82 is started. Evaluate the start information in the
OB 82.
Tip: Call SFC 13 within OB 82 and evaluate the diagnostic frame. (See
Section 6.3)
SM 321: Short Circuit of Sensor Power Supply to M
1. Open the front door of the DI module and use a wire to short-circuit the sensor
power supply Vs (terminal 10) to M (terminal 20).
2. Watch the status LEDs.
IM 153-2:
– SF:
lights up
SM 321; DI 16 x 24 V DC:
– SF:
lights up
⇒
Diagnostic message has been issued
– Vs:
does not light up (terminal 10)
3. Evaluate the diagnostic message.
Result:
– Station status 1:
Byte x.3 is set
⇒
External
diagnostics
– Module diagnosis:
Byte (x+7).3 is set
⇒
Slot 4
– Channel-specific diagnosis:
Byte (x+16).0 to (x+16).5:
000011
B
⇒
Slot 4
Byte (x+17).0 to (x+17).5:
not relevant
Byte (x+18).0 to (x+18).4:
00001
B
⇒
Short circuit
4. Remove the wire between terminal 10 and terminal 20.
Evaluate the diagnostic LEDs again.
IM 153-2:
– SF:
Off
SM 321; DI 16 x 24 V DC:
– SF:
Off
– Vs:
lights up (terminal 10)
The diagnostic message is erased.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
