Operating the software
5.4 The tabs of the RF620R/RF630R readers
SIMATIC RF-DIAG
64
Operating Manual, 09/2012, C79000-G8976-C292-01
5.4.8
The "Firmware-Update" tab
With the "Firmware-Update" tab, you can update the firmware of the serial RF600 readers
(RF620R/RF630R). You will find more detailed information on the firmware in the section
"Service & Support (Page 79)" and on the Internet on the "Support homepage
(
http://www.siemens.com/automation/service&support
)".
Figure 5-15 The "Firmware-Update" tab
To update the firmware, proceed as follows:
1.
Copy the update file to your PC or programming device.
2.
Select the update file.
You can enter the path of the update five in the input box or select the update file using
the "Browse..." button.
3.
Click the "Update" button to start the update.
Reaction: The update is started and the update progress is shown.
Reaction: Following a successful update, the "Info" tab is opened automatically.