Device maintenance and repair
5.5 Installing the software
SIMATIC IPC127E
Operating Instructions, 01/2019, A5E44296915-AA
51
5.5
Installing the software
5.5.1
Reinstalling the operating system
Information on installation of the operating system is available on the Internet and on the
supplied USB stick:
●
Microsoft® Windows® 10
https://support.industry.siemens.com/cs/ww/de/view/109749498/en?dl=en
5.5.2
Delivery state of the pre-installed software
5.5.2.1
Boot mode
Note
Setting Boot mode
We recommend that you restore the target system in the Boot mode that was set in the
delivery state.
•
Windows 10: UEFI Mode (UEFI = Unified Extensible Firmware Interface)
5.5.2.2
Partitions under Windows 10
Partitioning the hard disk or the SSD drive
For the Windows 10 operating system (boots in UEFI mode (GPT data storage medium)),
the following partitions are set up in the delivery state:
Partition
Name
Size of data storage medium
File system
32 GB
64 GB
128 GB
First
SYSTEM 25 GB
40 GB
100 GB
NTFS (not compressed)
Second
DATA
Remainder
Remainder
Remainder
NTFS (not compressed)