Product overview
2.2 Properties
PDC1000(F)
Equipment Manual, 02/2020, A5E48775040-AA
13
Properties
The PDC1000 has the following technical properties:
Property
Description
Additional information
Control of EC motors
The PDC1000 is a motor controller for
three-phase motors (EC) with supply
voltages to 48 V DC and permanent
magnets. DC motors are not supported.
(Page 26).
Use in protective extra low voltage
range < 42.4 V/60 V (SELV/PELV):
Supply voltage:
•
24 V DC for the logic unit (1L+, 2L+)
•
24 V DC to 48 V DC for the power
unit (4L+)
Maximum voltage of the power supply
units under fault conditions:
•
< 42.4 V DC for the logic unit (1L+,
2L+)
•
< 60 V DC for the power unit (4L+)
Section Technical Specifications
Current/Power
Output phase current I
eff
[A] for EC
motor
•
Nominal 17 A
•
Maximum 35 A
•
PDC1000 6BK1630-1BA00-0AA0:
–
Nominal 14.5 A
–
Maximum 29 A
Output phase current I
peak
[A] for EC
motor
•
Nominal 24 A
•
Maximum 49.4 A
•
PDC1000 6BK1630-1BA00-0AA0:
–
Nominal 20.5 A
–
Maximum 41 A
Typical power output S
el
[VA] for 24 V
supply
•
Nominal 500 VA
•
Maximum 1000 VA
•
PDC1000 6BK1630-1BA00-0AA0:
–
Nominal 425 VA
–
Maximum 850 VA
Typical power output S
el
[VA] for 48 V
supply
•
Nominal 1000 VA
•
Maximum 2000 VA
•
PDC1000 6BK1630-1BA00-0AA0:
–
Nominal 850 VA
–
Maximum 1700 VA
Summary of Contents for SIMATIC MICRO-DRIVE PDC1000
Page 1: ...PDC1000 F ...
