Safety notes
ANT793-8DP
28
C79000-G8974-C320-02, 01/2017
1
Safety notes
1.1
General safety notices
WARNING
Antennas installed outdoors must be within the area covered by a lightning
protection system. Make sure that all conducting systems entering from outdoors
can be protected by a lightning protection potential equalization system. When
implementing your lightning protection concept, make sure you adhere to the VDE
0182 or IEC 62305 standard.
WARNING
The device (and its components) may only be used for the application described in
the catalog or the operating instructions. It may only be combined with devices or
components of other manufacturers that have been approved and released by
Siemens.
These instructions are intended for industrial applications.
Correct and safe operation of the device is guaranteed only when it is transported,
stored, set up, installed, used and maintained according to the recommendations.
2
Description
2.1
Introduction
Antenna characteristics
The ANT793-8DP antenna is a directional antenna with linear polarization.
2.2
Scope of delivery
The following components are supplied with the antenna:
●
Antenna with N connector female
●
Universal fittings for wall and mast mounting
●
Compact Operating Instructions
Please check that the consignment you have received is complete. If it is not
complete or there are signs of external damage, please contact your supplier or your
local Siemens office.
