Communication Ports
4
The RUGGEDCOM i803 can be equipped with various types of communication ports
to enhance its abilities and performance. To determine which ports are equipped on
the device, refer to the factory data file available through RUGGEDCOM i803 . For
more information on how to access the factory data file, refer to the
RUGGEDCOM
ROS Configuration Manual
for the RUGGEDCOM i803.
Each communication port type has a specific place in the RUGGEDCOM i803 chassis.
1
2
3
1
Ports 1 to 4
2
Port 5
3
Ports 6 to 7
Figure 4.1
Port Assignment
Port
Type
1 to 4
Copper Ethernet Ports (10/100Base-TX)
5
Fiber Ethernet Port (100Base-FX)
Ports 6 to 7
Fiber Ethernet Ports (1000Base-SX or 1000Base-LX or 100Base-FX)
4.1
Copper Ethernet Ports
The RUGGEDCOM i803 supports several 10/100Base-TX Ethernet ports that allow
connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with
RJ45 male connectors. The RJ45 receptacles are directly connected to the chassis
ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.
RUGGEDCOM i803
Installation Manual, 01/2021, C79000-G8976-1005-06
15
