● Write
Enable or disable write access for the required group.
Note
For write access to work, you also need to enable read access.
● Persistence
Shows whether or not the group is assigned to an SNMPv3 user. If the group is not assigned
to an SNMPv3 user, no automatic saving is triggered and the configured group is deleted
after restarting the device.
– Yes
The group is assigned to an SNMPv3 user.
– No
The group is not assigned to an SNMPv3 user.
Procedure
Creating a new group
1. Enter the required group name in "Group Name".
2. Select the required security level from the "Security Level" drop-down list.
3. Click the "Create" button to create a new entry.
4. Specify the required read rights for the group in "Read".
5. Specify the required write rights for the group in "Write".
6. Click the "Set Values" button.
Modifying a group
1. Specify the required read rights for the group in "Read".
2. Specify the required write rights for the group in "Write".
3. Click the "Set Values" button.
Note
Once a group name and the security level have been specified, they can no longer be
modified after the group is created. If you want to change the group name or the security
level, you will need to delete the group and recreate it and reconfigure it with the new name.
Deleting a group
1. Enable "Select" in the row to be deleted.
Repeat this for all groups you want to delete.
2. Click the "Delete" button. The entries are deleted.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
152
Configuration Manual, 11/2019, C79000-G8976-C388-08
