Siemens SIMATIC NET SCALANCE S615 Configuration Manual Download

Page: 197 / 320

● Use Interface IP

Specify whether or not the internal IP address of the device will be used.

● Value

Enter the DHCP parameter that is transferred to the DHCP client. The content depends on

the DHCP option.

Value

Option name

Subnet Mask The subnet mask is entered au‐

tomatically.

Option cannot be deleted.

Offset time

Offset time to the coordinated

universal time UTC.

Enter the offset time in seconds in hex‐

adecimal format.

Router

The IPv4 address for router in the

subnet of the DHCP client. If the

device itself is the router, the

IPv4 address of the interface is

used.

You can specify several IPv4 address‐

es separated by commas.

Time server

The IPv4 address of the time

server available to the DHCP cli‐

ent.

Name server The IPv4 address of the name

server available to the DHCP cli‐

ent.

DNS Server

The IPv4 address of the DNS

server available to the DHCP cli‐

ent.
If the device itself is the DNS

server, the IPv4 address of the

interface is used.

NTP Server

The IPv4 address of the NTP

server available to the DHCP cli‐

ent.

TFTP server

The IPv4 address or the host‐

name of the TFTP server availa‐

ble to the DHCP client.

Enter the address of the TFTP server.

Name of the

boot file

The name of the boot file that the

client downloads from the TFTP

server.

Enter the name of the boot file in the

string format.

Configuring with Web Based Management

4.5 "System" menu

SCALANCE S615 Web Based Management

Configuration Manual, 11/2019, C79000-G8976-C388-08

197

Summary of Contents for SIMATIC NET SCALANCE S615

































































































































































































































































































































Search results

Summary of Contents for SIMATIC NET SCALANCE S615

Reviews:

Related manuals for SIMATIC NET SCALANCE S615

Brands by name

Popular brands

Siemens SIMATIC NET SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SIMATIC NET SCALANCE S615

Reviews:

Related manuals for SIMATIC NET SCALANCE S615

Brands by name

Popular brands