The information sent is stored on every device with LLDP capability in an LLDP MIB file.
Network management systems can access these LLDP MIB files using SNMP and therefore
recreate the existing network topology. In this way, an administrator can find out which network
components are connected to each other and can localize disruptions.
On this page, you have the option of enabling or disabling sending and/or receiving per port.
Description
Table 1 has the following columns:
● All Ports
Shows that the settings are valid for all ports.
● Setting
Select the setting from the drop-down list. If "No Change" is selected, the entry in table 2
remains unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
Configuring with Web Based Management
4.7 "Layer 2" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
229
