Siemens SIMATIC NET SCALANCE S615 Configuration Manual Download

Page: 262 / 320

4.9.3

AAA

4.9.3.1

General

Login of network nodes

The designation "AAA" stands for "Authentication, Authorization, Accounting". This feature is

used to identify and allow network nodes, to make the corresponding services available to them

and to specify the range of use.
On this page, you configure the login.

Description

The page contains the following boxes:

Note
To be able to use the login authentication "RADIUS", "Local and RADIUS" or "RADIUS and

fallback Local" a RADIUS server must be stored and configured for user authentication.

● Login Authentication

Specify how the login is made:
– Local

The authentication must be made locally on the device.

– RADIUS

The authentication must be handled via a RADIUS server.

– Local and RADIUS

The authentication is possible both with the users that exist on the device (user name

and password) and via a RADIUS server.

The user is first searched for in the local database. If the user does not exist there, a

RADIUS request is sent.

– RADIUS and fallback Local

The authentication must be handled via a RADIUS server.

A local authentication is performed only when the RADIUS server cannot be reached in

the network.

Configuring with Web Based Management
4.9 "Security" menu

SCALANCE S615 Web Based Management

262

Configuration Manual, 11/2019, C79000-G8976-C388-08

Summary of Contents for SIMATIC NET SCALANCE S615

































































































































































































































































































































Search results

Summary of Contents for SIMATIC NET SCALANCE S615

Reviews:

Related manuals for SIMATIC NET SCALANCE S615

Brands by name

Popular brands

Siemens SIMATIC NET SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SIMATIC NET SCALANCE S615

Reviews:

Related manuals for SIMATIC NET SCALANCE S615

Brands by name

Popular brands