4.4
Mounting onto standard rail (SCALANCE XF204-2BA IRT)
Installation
Figure 4-2
DIN rail mounting
To install the device on a 35 mm DIN rail complying with DIN EN 60715, follow the steps below:
1. Place the housing guide of the device on the top edge of the DIN rail
①
.
2. Press the device down against the DIN rail until the spring catch locks in place
②
.
3. Fit the connectors for the power supply, see the section "Connecting up (Page 57)".
4. Insert the terminal blocks into the sockets on the device.
Removal
PU
SH
Figure 4-3
Removing from a DIN rail
Installation and removal
4.4 Mounting onto standard rail (SCALANCE XF204-2BA IRT)
SCALANCE X-200
48
Operating Instructions, 11/2021, C79000-G8976-C284-15