Application planning
3.4 Guidelines for Handling Electrostatic Sensitive Devices (EMC)
SIMATIC PC Panel PC 677/877, Control Unit
Operating Instructions, Edition 04/2005, A5E00407724-01
3-3
3. Enter the order number of the control unit, for example "A5E…", in the table. You can find
the number on the rating label of the control unit.
Figure 3-2
Rating label of the operator unit, example
4. Enter the Ethernet address of the device: The Ethernet address is located in the "Main"
menu of the BIOS setup, "Hardware Options > Ethernet Address."
Identifier
Number
1
Microsoft Windows Product Key COA
2
SVP number
3
Order number of the computer unit
4
Operator unit order number
5
Ethernet address
3.4
3.4
Guidelines for Handling Electrostatic Sensitive Devices (EMC)
Electromagnetic compatibility
The device fulfills the requirements of the EMC law of the Federal Republic of Germany as
well as the EMC Guidelines of the Single European Market.
The device is designed as a built-in model with front-sided Protection Class IP 65. Ensure
compliance with the EN 61000-4-2 standard by installing the device in grounded metal
cabinets, e.g. MC cabinets, Siemens catalog NV21.
Note
Please refer to the appendix for for more information concerning the EMC requirements.
Installing the device according to EMC guidelines
Principles of interference-free operation:
•
Installing the controls according to EMC guidelines
•
Using interference immune cable
Note
The instructions "Guidelines for the assembly of interference immune programmable logic
controllers" with the article ID 1064706 and the manual "PROFIBUS networks" with the
article ID 1971286, which also applies to the installation of the device, is located on the
"Documentation and Drivers" CD.
