4-10
PG 760 PII Programming Device
C79000-G7076-C766-01
4.4
Installing Memory Expansion Cards
There are three ECC-compatible slots for 72-bit DIMM memory expansion
submodules on the mother board. The current memory configuration is 64
MB. You can extend it up to a maximum of 384 MB. The memory comes
supplied with EDO RAM submodules.
Only one submodule must be fitted. You can fit a combination of EDO and
SDRAM submodules.
If ECC submodules are fitted in combination with non-ECC submodules, the
memory works without ECC backups or correction.
Organisation
Size in Mbytes
Type
Access Time/
Frequency
8Mx64
64
EDO
60ns
16Mx64
128
EDO
60ns
8Mx72
64
EDO with ECC
60ns
16Mx72
128
EDO with ECC
60ns
8Mx64
64
SDRAM
>=83MHz
16Mx64
128
SDRAM
>=83MHz
8Mx72
64
SDRAM with ECC
>=83MHz
16Mx72
128
SDRAM with ECC
>=83MHz
You will find the order numbers for the memory expansion cards in the
Product Information Bulletin.
!
Caution
Risk of damage!
The electronic components on the printed circuit boards are highly sensitive
to electrostatic discharge. When handling the boards or cards, you must
follow the guidelines for electrostatically sensitive components (ESD
guidelines at the end of this manual).
Standard Memory
PG 760 PII Expansions
