Preface
PN/PN coupler
4
Installation and Operating Manual, 06/2010, A5E00717043-04
Identification for Australia (C-Tick mark)
see appendix General technical data (Page 81)
Standards
see appendix General technical data (Page 81)
Classification in information landscape
Depending on the hardware used, you will need the following manuals in addition to this one:
●
the manual for the IO Controller used. The following details in this manual apply in
particular:
–
Configuring and commissioning of a PROFINET IO system
–
Description of the IO Controller
●
the PROFINET System Description
(
http://support.automation.siemens.com/WW/view/en/19292127
)
●
the Programming Manual From PROFIBUS DP to PROFINET IO
(
http://support.automation.siemens.com/WW/view/en/19289930
)
Guide
The manual is based on the following subject areas:
●
Product overview and description of the PN/PN coupler
●
Assembly, connection and commissioning
●
Operation and diagnostics
●
Appendices
Important terms are explained in the glossary. The index helps you to quickly find all texts
relevant to your keyword.
Recycling and disposal
Given its environmentally-compatible equipment, the PN/PN coupler can be recycled.
Contact a company certified in the disposal of electronic waste to ensure the
environmentally-compatible recycling and disposal of your used device.
Additional support
If you have questions regarding use of the products described in these operating
instructions, and do not find the answers in this document, contact your local Siemens
representative.
Your contact persons are listed in the Internet (
http://www.siemens.com/automation/partner
).
A guide to the technical documentation for the various SIMATIC products and systems is
available in the Internet (
http://www.siemens.com/automation/simatic/portal
).
The online catalog and ordering systems are available in the Internet
(
http://www.siemens.com/automation/mall
).
