Configuring with the WBM
7.3 The menu items of the WBM
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
81
The "Network interfaces" tab
The "Network interfaces" tab is divided into the following areas:
●
Network ports
●
SNMP
●
NTP
●
Syslog messages
Figure 7-8
The "Settings -- Communication" menu item, "Network interfaces" tab
Network ports
In the "Network ports" area, you can enable/disable the network ports of the communication
module. Click on the check box of the required network port to enable or disable it.
Note
Disabling the network ports
Make sure that you do not disable the port via which you are currently communicating with
the device.