SIMATIC S5 3964(R) Driver
GP-Pro EX Device/PLC Connection Manual
9
External Device Settings
Use the program controller (SIMATIC PG615) to configure communication settings for the External Device.
Refer to your External Device manual for details.
1
Set the RUN/STOP switch on the CPU unit to STOP.
2
Turn the program controller power ON to check that it is configured as shown below.
3
Define the BLOCK OB.
Press the ENTER key to move to the INIT.STATE menu.
4
Select the INPUT menu.
5
Select the INPUT PC menu.
6
Select the DX.
7
Press key 2.
8
Press the ENTER key to display [KH•••KC].
9
Press key 1 to display the first address [0000:KH=].
10
Set each address as shown below.
To move the address, press the down key.
11
After all addresses are set, press the ENTER key to display [OVERWRITE?].
12
Press the ENTER key to move to the INIT.STATE menu.
13
Define the BLOCK DB.
Press key 1 to move to the INPUT menu.
14
Select the INPUT PC menu.
15
Select the DB.
16
Press key 9.
17
Press the ENTER key to display [KH•••KC].
Setup Items
Setting Value
ON-LINE
YES
SYSTEM OP
YES
WORD ADDR
YES
• If there are any items set differently from the above settings, set the cursor to the item using
the up key or the down key and press key 1.
Address
Setting Value
Address
Setting Value
0000
4D41
0008
0000
0001
534B
0009
0000
0002
5832
0010
0000
0003
0020
0011
0000
0004
4409
0012
0000
0005
0000
0013
0000
0006
0000
0014
4D00
0007
0000
0015
0020
