Blocks and Their Functions
S5-95F
Special Characteristic of the DQ Test
During the DQ test, the S5-95F briefly resets the outputs to be tested. If you wish to call up the DQ
test by means of function block FB 252, then please refer to section 4.3.
9.2.7
Depassivation Block
- FB255 -
Passivation of the I/Os can have the following causes:
•
Defective sensors
•
Defective or wrong cabling
•
Defective modules
If you are able to remedy errors in the RUN mode, then you can use function block FB255 to re-
integrate the passivated I/Os into the control process.
During depassivation, the S5-95F tests all I/Os. That is why depassivation must be carried out in a
safe system status.
Calling and parameter assignments
Parameter
Meaning
Assignment
Type
STL
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
: JU FB 255
Name : AGF:DEPA
: SIGR
: DEPA
: PAFE
AUFT
Type of job
0.0:
Acknowledge error
(delete error blocks in DB 254)
1,X
Depassivate signal group with
X=0,1,2 to 31
(delete corresponding error
block in DB254)
I/KY
Parameter error
Q/BY
00
H
= Test terminated and
depassivation successful
11
H
= Signal group not passivated
31
H
= Error detected in signal group,
signal group remains
passivated
41
H
= Block assigned wrong
parameters
D0
H
= Depassivation active, test
active
E0
H
= Depassivation active, waiting
for test
PAFE
DEPA
Trigger job
I/BI
Edge from 0 1 triggers FB255 job
9-22
EWA 4NEB 812 6210-02
