523
Hardware Installation
3.2
Wiring
The module has a serial interface port. You can configure either the TTY interface or the RS-232-C
interface (-D Section 6). The cables from both interfaces are run to a 25-pin Cannon
subminiature D female connector.
3.2.1
Connections
Backplane connector Xl
Cannon subminiature D female connector
(25-pin)
Shield
Fastening screw, 4-40
thread
Figure 3-3. Connectors
Permissible conductor cross section for the Cannon subminiature D connector: up to 0.5
(20 AWG)
EWA
16044-02a
3-5