Maintenance
11.4 Firmware update
S7-1500R/H redundant system
System Manual, 10/2018, A5E41814787-AA
271
Procedure
To replace the coding element on the power connector of the system power supply and load
current supply, follow these steps:
1.
Orient yourself using the labeling on the power cable connection.
Figure 11-3 Labeling on the power connector
2.
Orient yourself using the red marking on the coding element.
3.
The coding element has 3 red markings. Turn the coding element in such a way that one
of the 3 red markings corresponds to the voltage indicated on the connector.
4.
Insert the coding element into the back side of the power cable connector, until you hear
it click into place. The figure below shows you how to insert a coding element into a
power cable connector for 24 V DC.
Figure 11-4 Inserting a coding element into a power connector
Summary of Contents for Simatic S7-1500H
Page 1: ......
