Procedure
1. Change the Bluetooth name (BLE name). The BLE name is used for simple identification of the
device via Bluetooth. The length of the name is limited to 7 characters. The following
characters are permitted: a-z, A-Z, 0-9, -, _.
2. Change the user names. The user name must not comprise more than 21 characters.
3. Change the password in the "Password" field. The password must meet the following
requirements:
– Minimum of 6 characters
– Maximum 15 characters
– At least one uppercase letter (A-Z)
– At least one lowercase letter (a-z)
– At least one numeral (0-9)
– The following special characters are permitted: Hyphens (-) and underscores (_) are
allowed.
4. Enter the new password again in the "Repeat password" field.
5. Move on to the next step with the "Next" button.
Commissioning
6.3 Commissioning with iOS
SIMOTICS CONNECT 400
58
Operating Instructions, 08/2021, A5E50161952B AE