3. Change the password in the "Password" field. The password must meet the following
requirements:
– Minimum of 6 characters
– Maximum 15 characters
– At least one uppercase letter (A-Z)
– At least one lowercase letter (a-z)
– At least one numeral (0-9)
– The following special characters are permitted: Hyphens (-) and underscores (_) are
allowed.
4. Enter the new password again in the "Repeat password" field.
5. Confirm your changes by pressing "Apply"
The user data are changed.
7.2.5
Check asset data
After onboarding, you can display the asset data stored in the connectivity module.
Operation
7.2 Operation with iOS
SIMOTICS CONNECT 400
94
Operating Instructions, 08/2021, A5E50161952B AE
