● Connect the machine in such a way that a permanent, safe electrical connection is
maintained. Avoid protruding wire ends.
● Lay and secure external auxiliary cables separately from the main cable. Elements with
cable ties may be present for this purpose.
● In case of high humidity or when installed outside, water drops can move along the cable
jacket and enter the motor through the cable entry and cable gland.
If you route the cable with an appropriate loop then water doesn't enter the terminal box, but
simply drips off.
;
;
Figure 6-1
Water drip loop
6.3
Terminal box
Depending on the version, different terminal boxes may be installed on the machine.
Depending on the terminal box, different cable entries and options for the cable connection are
possible. You can identify the terminal box installed on the machine via the illustrations in the
following chapters.
6.3.1
Terminal box GT640
The GT640 terminal box is used only for machines on the power supply with shaft height 315.
Electrical connection
6.3 Terminal box
SIMOTICS FD 1LH1
74
Operating Instructions 01/2019
Summary of Contents for SIMOTICS FD 1LH1
