Connecting
5.4 System integration
SIMOTICS S-1FG1 servo geared motor
122
Operating Instructions, 07/2019, A5E47360747B AA
Removal of the RJ45 connector
Procedure
1.
Turn the locking ring of the connector counterclockwise into the "unlocked" position.
①
Turn the locking ring counterclockwise.
→ Both tabs are pressed away by the
latches.
2.
Check that the two tabs are disengaged from the latches.
3.
Pull the connector out of the RJ45 socket of the Sensor Module.
You have now released the DRIVE-CLiQ connection.
❒
5.4.4.3
Handling the quick-action locking
The motors are equipped with SPEED-CONNECT connectors.
You can also connect quick-connection cables with SPEED-CONNECT to motor connectors
as conventional cables with screw locks (fully threaded).
Note
We recommend cables with SPEED-CONNECT because they are easier to use.
Summary of Contents for SIMOTICS S-1FG1
