Description
2.2 Technical features and ambient conditions
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 07/2019, A5E47360747B AA
23
2.2.3
Environmental conditions
You can classify the ambient conditions for stationary use at weatherprotected locations
according to the standard DIN IEC 60721-3-3. The environmental effects and their limit
values are defined in various classes in this standard.
You can assign the SIMOTICS S-1FG1 servo geared motors to climate class 3K4 with the
exception of the environmental factor "condensation". Condensation is not permissible.
The following temperature ranges apply for natural-cooled and forced-ventilation motors.
Table 2- 1
Ambient conditions based on climate class 3K4
Environmental parameter
Unit
3K4 class
a) Low air temperature
°C
-15
b) High air temperature
°C
+40
c) Low relative humidity
%
5
d) High relative humidity
%
95
e) Low absolute humidity
g/m
3
1
f)
High absolute humidity
g/m
3
29
g) Rate of temperature change
1)
°C/min
0.5
h) Low air pressure
4)
kPa
70
i)
High air pressure
2)
kPa
106
j)
Solar radiation (insolation)
W/m
2
700
k) Thermal radiation
-
-
l)
Air movement
3)
m/s
1.0
m) Condensation
-
Not permissible
n) Wind-driven precipitation (rain, snow, hail, etc.)
-
-
o) Water (other than rain)
-
See degree of protection
p) Formation of ice
-
-
1)
Averaged over a period of 5 min
2)
Conditions in mines are not considered.
3)
A cooling system based on natural convection can be disturbed by unforeseen air movements.
4)
The limit value of 70 KPa covers applications worldwide. (Altitudes up to 3000 m)
Note
Installation instructions
The 1FG1 servo geared motor is not suitable for operation in hazardous areas.
Note
Additional data on the ambient conditions
You will find additional data on the ambient conditions, such as ambient temperatures or
conditions for transportation and storage of the motors, in the relevant chapters of this
documentation.
Summary of Contents for SIMOTICS S-1FG1
