Safety information
2.7 Electrostatic sensitive devices
1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 06/2020, A5E44455710A
15
Ignition hazards
The assessment of operating risks and local operating conditions and the necessary
monitoring methods must be clarified and made binding by the system operator in
consultation with the responsible supervisory authority. The required measures must be
adhered to at all times. The machine manufacturer cannot provide any generally applicable
recommendations. Please observe the information in these operating instructions.
Note
The basic requirements relating to the assessment of ignition hazards arising from electrical
equipment and their operation in hazardous zones are specified in the 2014/34/EU and
1999/92/EC directives as well as in the IEC/EN 60079 series of standards.
If a third-party certification is available for the machine, then carefully comply with the
technical data defined in it and any special conditions.
The certificate must be available before commissioning.
2.7
Electrostatic sensitive devices
Material damage due to electrostatic discharge
Electronic modules contain components that can be destroyed by electrostatic discharge.
These components can be damaged or destroyed if they are not handled correctly. To
protect equipment against damage, follow the instructions given below.
●
Only touch electronic modules if you absolutely have to work on them.
●
The body of the person concerned must have been electrostatically discharged and
grounded immediately before any electronic modules are touched.
●
Electronic modules should not be brought into contact with electrically insulating
materials, such as:
–
Plastic film
–
Plastic parts
–
Insulating table supports
–
Clothing made of synthetic fibers
●
Always place electrostatic sensitive devices on conductive bases.
●
Always pack, store and transport electronic modules or components in conductive
packaging, such as:
–
Metallized plastic or metal containers
–
Conductive foam material
–
Domestic aluminum foil