SIMOTION C
Operating Instructions, 02/2012
3
Preface
Contents of manual
This document is part of the SIMOTION C documentation package.
Sections in this manual
The following is a list of sections included in this manual along with a description of the
information presented in each section.
● Description
This section explains the purpose and potential applications of the module.
● Operation (hardware)
This section describes the operator controls and how they are operated.
● Interfaces
This section includes a description of the interfaces and their functions.
● Installing
This section explains how to configure the mechanical design and how to install the
SIMOTION C components.
● Connecting
This section describes the wiring and networking of SIMOTION C.
● Addressing
This section contains the information you will require to define the module start addresses
for the modules you are using.
● Commissioning (hardware)
This section describes how you commission the hardware components and what you
must take into account.
● Service and maintenance
This section describes how you replace the module and update the SIMOTION Kernel.
● Interrupt, error and system alarms
This section provides information about the causes of alarms and the corrective actions
you must take.
● Technical data
This section describes the properties and features of the SIMOTION C.
● Dimension drawing
This section contains the dimension drawing of SIMOTION C.
