Configuring and installing
4.3 Installing
SIMOTION C
88
Operating Instructions, 02/2012
4.3.3
After installation
Inserting the key (C230-2)
Once the C230-2 has been mounted on the mounting rail, you can insert the key in the
STOP or STOPU position on the C230-2.
6723
581
67238
Figure 4-7
Inserting the key in the C230-2
Assigning the slot numbers
After mounting, you can assign each module a slot number. This eases the assignment of
the modules to the configuration table in the
Engineering System. The table below shows the
slot number assignment.
Table 4- 7
Slot numbers for S7 modules and SIMOTION C
Slot no.
Module
Comments
1
Power supply (PS)
-
2
SIMOTION C
-
3
Reserved
-
4
1. I/O module
To the right of SIMOTION C
5
2. I/O module
-
6
3. I/O module
-
7
4. I/O module
-
8
5. I/O module
-
9
6. I/O module
-
10
7. I/O module
-
11
8. I/O module
-
