Addressing the I/O
5-75
E
Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
5.3
Addressing signal modules
Introduction
The following section describes signal module addressing. You need the informa-
tion so that you can address the signal module channels in the user program.
Addresses of digital modules
The address of an input or output of a digital module is made up of the byte ad-
dress and the bit address.
E.g.
I 1.2
Input
Byte
address
Bit address
The byte address is governed by the module initial address.
You can note the bit address on the module.
Fig. 5-2 shows the plan on which the addresses for the individual channels of the
digital module are based.
Byte address:
Module initial address
Byte address:
Module initial a 1
Bit address
Fig. 5-2
Addresses for the inputs and outputs of digital modules
Summary of Contents for SIMOTION C230-2
Page 16: ...Product Overview 1 16 E Siemens AG 2003 All rights reserved SIMOTION C230 2 04 2003 Edition ...
Page 70: ...Installation 4 70 E Siemens AG 2003 All rights reserved SIMOTION C230 2 04 2003 Edition ...
Page 124: ...Commissioning 8 124 E Siemens AG 2003 All rights reserved SIMOTION C230 2 04 2003 Edition ...
Page 130: ...Maintenance 9 130 E Siemens AG 2003 All rights reserved SIMOTION C230 2 04 2003 Edition ...
