● The runtime should be taken into consideration: Position control DP cycle clock activation
in the drive (i.e. the position of the position control cycle clock in relation to the DP cycle
clock as well).
● The actual position of the encoder is not evaluated directly, instead the filtered actual
position is evaluated (see Actual value system).
5.2.6
Configure Units
You can define the basic units for each technology object. The same physical variables can
have different units in different technology objects. These are converted:
How to configure the units:
1. In the project navigator, open the context menu for the technology object.
2. In the context menu, select Expert > Configure units. The Configure Units window appears
in the working area.
3. Select the unit for the physical variables. These units are used for the technology object,
e.g. s for time units.
or
1. In the project navigator, open the Configuration under the TO.
2. Select the Units tab.
Measuring Input TO - Part III
5.2 Fundamentals of Measuring Input technology object
Output Cams and Measuring Inputs
Function Manual, 04/2014
151