08.2012
Parameterizing Steps
Siemens AG
6SE7087-6QX70 (Version AN)
SIMOVERT MASTERDRIVES
Compendium Motion Control
6-9
Order number
In [A]
PWE
6SE7031-0EE70 92.0
74
6SE7031-2EF70 124.0
82
6SE7031-8EF70 186.0
1)
155.0
2)
98
6SE7032-1EG70 210.0
1)
175.0
2)
102
6SE7032-6EG70 260.0
1)
218.0
2)
108
6SE7033-2EG70 315.0
1)
262.0
2)
112
6SE7033-7EG70 370.0
1)
308.0
2)
116
6SE7035-1EK70 510.0
1)
423.0
2) 3)
147
6SE7036-0EK70 590.0
1)
491.0
2) 3)
151
6SE7037-0EK70 690.0
4)
164
Order number
In [A]
PWE
6SE7031-0TE70 92.0
75
6SE7031-2TF70 124.0
83
6SE7031-8TF70 186.0
1)
155.0
2)
99
6SE7032-1TG70 210.0
1)
175.0
2)
103
6SE7032-6TG70 260.0
1)
218.0
2)
109
6SE7033-2TG70 315.0
1)
262.0
2)
113
6SE7033-7TG70 370.0
1)
308.0
2)
117
6SE7035-1TJ70 510.0
1)
423.0
2) 3)
120
6SE7036-0TJ70 590.0
1)
491.0
2) 3)
123
6SE7037-0TJ70 690.0
4)
163
6SE7038-6TK70 860.0
4)
127
6SE7041-1TK70 1100.0
4)
135
6SE7041-3TL70 1300.0
4)
154
1)
theoretical rated output current at 3 kHz pulse frequency; rated output
current can only be achieved if the Power Extension PIN is entered.
2)
rated output current at 5 kHz pulse frequency; the permissible rated output
current will be reduced further at higher pulse frequencies (see technical
data, derating)
3)
This device is a chassis unit (from type J). The overload over 30 s is
therefore limited to 1.36 x the rated output current at 5 kHz.
4)
This unit is a so-called chassis unit and can only be operated up to a
maximum pulse frequency of 2.7 kHz. The overload for 30 s is limited to
1.36 times the rated output current.
Frequency
converter, chassis-
type AC-AC units
Inverter, chassis-
type DC-AC units
