![background image](http://html.mh-extra.com/html/siemens/simpro-100/simpro-100_instruction-manual_383121041.webp)
SIMPRO-100
SIMPRO-PC Software
3
PRIM-2400C
39
3 SIMPRO-PC Software
3.1
Introduction
The SIMPRO-PC software package is provided
with each SIMPRO-100 Relay. This software
package allows you to do the following:
•
Create settings for one or more SIMPRO-100
Relays.
•
Store and retrieve settings to and from PC
files.
•
Upload and download relay settings to and
from SIMPRO-100 Relays.
•
Execute relay serial port commands in
terminal mode to view relay and motor data.
3.2
System
Requirements
To successfully install and use the SIMPRO-PC
software, your PC must have the minimum
resources listed below:
Table 3.1
SIMPRO-PC Software System
Requirements
3.3
Installation
To install the SIMPRO-PC software, perform the
following steps:
1. With your PC turned on and all applications
closed, load the SIMPRO-PC software
CD-ROM into your CD-ROM drive.
2. The setup software should run automatically.
If Setup does not start, use the Microsoft
Windows Run function to start the program
Setup.exe from the CD-ROM.
3. Follow the steps as they appear on screen.
The setup program also gives you the
opportunity to install an online copy of the
SIMPRO-100 Relay Instruction Manual and
Adobe Acrobat Reader™ software necessary
to view the PDF format instruction manual.
Processor
Pentium Class,
≥
90 MHz
RAM
≥
16 MB
Hard Drive
10 MB available space
Operating System
Microsoft Windows
®
95/98 or NT 4.0
Serial Port
One EIA-232 serial port (needed for
upload/download connection to
relay)
Drives
3.5" floppy or CD-ROM for software
installation
Summary of Contents for SIMPRO-100
