Technical specifications
8.2 Directives and declarations
SINAMICS CONNECT
82
Operating Instructions, 10/2018, A5E45421408
8.2
Directives and declarations
8.2.1
Notes on CE marking
Electromagnetic compatibility
This product meets the requirements of EU Directive 2014/30/EU "Electromagnetic
Compatibility".
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Requirements for
Interference emission
Immunity to interference
Second environment, Category C2
EN 61000-6-4:2007 +A1:2011 EN 61000-6-2:2005
8.2.2
ESD guideline
What does ESD mean?
An electronic module is equipped with highly integrated components. Due to their design,
electronic components are highly sensitive to overvoltage and thus to the discharge of static
electricity. Such electronic components or modules are labeled as electrostatic sensitive
devices.
The following abbreviations are commonly used for electrostatic sensitive devices:
●
ESD – Electrostatic sensitive device
●
ESD – Electrostatic Sensitive Device as a common international designation
Electrostatic sensitive devices can be labeled with an appropriate symbol.
NOTICE
Damage to ESD due to direct touch
Electrostatic sensitive devices, ESD, can be destroyed by voltages which are far below the
human perception limit. If you touch a component or electrical connections of a module
without discharging any electrostatic energy, these voltages may arise. The damage to a
module by an overvoltage can often not be immediately detected and only becomes evident
after an extended period of operation. The consequences are incalculable and range from
unforeseeable malfunctions to a total failure of the machine or system.
•
Avoid touching components directly.
•
Make sure that persons, the workstation and the packaging are properly grounded.
