Additional information on the SIMOGEAR geared motor
11.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
SINAMICS G115D distributed drive
390
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
11.1.5
Incoming goods
NOTICE
Transport damage impairs correct functioning
Do not commission faulty gearboxes or geared motors.
Note
Do not open or damage parts of the packaging that preserve the product.
Note
Check that the technical specifications are in accordance with the purchase order.
Inspect the delivery immediately on arrival for completeness and any transport damage.
Notify the freight company of any damage caused during transport immediately (this is the
only way to have damage rectified free of charge). Siemens AG will not accept any claims
relating to items missing from the delivery and which are submitted at a later date.
The gearbox or geared motor is delivered in a fully assembled condition. Additional items are
sometimes delivered packaged separately.
The products supplied are listed in the dispatch papers.
11.1.6
General information on transport
NOTICE
The use of force will damage the gearbox or geared motor
Transport the gearbox or geared motor carefully. Avoid knocks.
Before putting the drive into operation, remove any transport fixtures and keep them safe or
render them ineffective. You can then use them again for transporting further items or you
can apply them again.
Different forms of packaging may be used, depending on the size of the gearbox or geared
motor and the method of transport. Unless contractually agreed otherwise, the seaworthy
packaging complies with HPE Packaging Guidelines (Bundesverband Holzpackmittel Paletten
Exportverpackungen e.V., the German Federal Association for wooden packaging, pallets,
and export packaging).
