Introduction to the SINAUT ST7 system
1.11 SINAUT ST7sc SCADA Connect software
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
77
When supplying the current time of day, the following situations must be distinguished:
●
For TIMs (TIM 4x), connected to the ST7sc PC over MPI, time synchronization is possible
only with a TIM equipped with a DCF77 receiver. This then serves as the central time
synchronization source for the ST7sc PC and all other TIMs connected to MPI. These, in
turn, synchronize their stations connected over the WAN.
●
For TIMs (TIM 3V-IE) connected directly to the ST7sc PC over IP-based WAN, the time is
synchronized by ST7sc.
A GPS receiver is recommended outside the reception range of the DCF77 time transmitter;
this can determine the local time from the satellite-based GPS system (Global Positioning
System).
1.11.3
Ordering data for SINAUT ST7sc
Table 1- 11 Ordering data for SINAUT ST7sc
Short name
Order no.
Explanation
SINAUT ST7sc
Software for connecting SINAUT stations to HMI,
SCADA and Office applications over OPC; single
license for one installation of the runtime software;
Runtime software, configuration software, and
electronic manual on CD-ROM; license key on
diskette; German/English
SINAUT ST7sc S
6NH7997-5CA05-0AA1
Small license for a maximum of 6 SINAUT stations
SINAUT ST7sc M
6NH7997-5CA05-0AA2
Medium license for a maximum of 12 SINAUT
stations
SINAUT ST7sc L
6NH7997-5CA05-0AA3
Large license for more than 12 SINAUT stations
SINAUT ST7sc SM 6NH7997-5AA00-0AD2
License upgrade from ST7sc S to ST7sc M
(from 6 to 12 stations)
SINAUT ST7sc SL 6NH7997-5AA00-0AD3
License upgrade from ST7sc S to ST7sc L
(from 6 to more than 12 stations)
SINAUT ST7sc ML 6NH7997-5AA00-0AE3
License upgrade from ST7sc M to ST7sc L
(from 12 to more than 12 stations)
MANUAL ST7sc D 6NH7998-5AA11
SINAUT ST7sc manual on paper, German
MANUAL ST7sc E 6NH7998-5AA21
SINAUT ST7sc manual on paper, English
