14011
[Channel %1: ] Block %2 program %3 not existing or will be edited
Parameters:
%1 = Channel number
%2 = Block number, label
%3 = Program name
Explanation:
A subroutine call was canceled because the called subroutine could not be opened.
The subroutine call can be executed via
- subroutine designator
- CALL / PCALL / MCALL command
- SETINT command
- M/T function replacement
- event-driven program calls (PROG_EVENT)
- selection of a PLC ASUB via PI "_N_ASUP__" and/or FB-4
- calling a PLC ASUB via interrupt interface (FC-9)
There are various reasons for the alarm:
- the subroutine is not in the parts program memory the subroutine
- the subroutine is not in the search path (selected directory, _N_SPF_DIR or cycle directories _N_CUS_DIR,
_N_CMA_DIR, _N_CST_DIR
- the subroutine has not been released or is being edited
- faulty absolute path name in subroutine call:
Examples of complete path names: /_N_directoryName_DIR/_N_programmName_SPF or /_N_WKS_DIR/
_N_wpdName_WPD/_N_programmName_SPF. directoryName: MPF, SPF, CUS, CMA, CST (predefined directories).
wpdName: application-specific designator for workpiece directories (max. of 24 signs). programmName: Name of
subroutine (max. of 24 signs)
- A reload buffer for executing from external was called as subroutine.
Note: Unknown designators (string) found in the parts program line by themselves, are interpreted as subroutine calls.
Reaction:
Correction block is reorganized.
Interface signals are set.
Alarm display.
Remedy:
Ensure that the subroutine (alarm parameter %3)
- is available in the parts program memory
- has been released and is not being edited
- is available in the search path if not being called via an absolute path name.
Programm
continuation:
Clear alarm with NC START or RESET key and continue the program.
14012
[Channel %1: ] Block %2 maximum subroutine level exceeded
Parameters:
%1 = Channel number
%2 = Block number, label
Explanation:
The maximum nesting depth of 16 program levels has been exceeded.
Subroutines can be called from the main program, and these in turn may have a nesting depth of 15.
For interrupt routines, two additional program levels can be used. This means that the total number of program levels is
increased to 18.
The program levels are jointly used by user programs and Siemens cycles and/or Siemens applications such as ShopMill
and ShopTurn.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
Modify the machining program so that the nesting depth is reduced, e.g. using the editor copy a subroutine of the next
nesting level into the calling program and remove the call for this subroutine. This reduces the nesting depth by one program
level.
Programm
continuation:
Clear alarm with the RESET key. Restart part program
SINUMERIK 808D ADVANCED alarms
5.2 NCK alarms
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
179
