While for the drive machine data, the following two softkeys are addi‐
tionally provided:
Switches among available drives
Setting the setting data
+
1. Select the desired operating area.
2. Open the expert data list through the following softkey operations:
→
3. Press this key to view the extended softkeys. The following three groups
of setting data are available:
General setting data
Channel-specific setting data
Axis-specific setting data
4. Locate the setting data which you desire to set.
You can also search for an SD using the following softkeys:
Searches for the desired number or the name (or a part of the name)
of the setting data
Continues searching for the next match
5. Enter the desired value in the blank and press this key to confirm.
6. Press this softkey to activate the modified value(s) after you finish set‐
ting the data. Further softkey operations are available for the data set‐
ting:
Resets the value of the selected setting data to default
Undoes the modified values and recalls the lastly used values
Operating in the system data management operating area
3.3 Setting both system machine data and setting data
Diagnostics Manual
20
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
