Remedy:
Set MD 18080, Bit 8=1
61409
[Channel %1: ] Block %2: set up offsets not present
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Set MD 18112, Bit 4=1
61410
[Channel %1: ] Block %2 access to nonexistent tool element or property
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
The variable to be corrected requires an option or an increase in MD values.
61411
[Channel %1: ] Block %2: Check the distribution of measuring points on the plane.
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Check the setpoint and actual values
61412
[Channel %1: ] Block %2: channel basic frame not present
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Set MD 28081>0, $P_CHBFRMASK>0
61413
[Channel %1: ] Block %2: check setpoint of ball diameter, %4
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Check setpoint value of spherical diameter.
61414
[Channel %1: ] Block %2 : distortion of triangle over limit
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Check the setpoint and actual values
61415
[Channel %1: ] Block %2: Check probe / machining plane
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Explanation:
Remedy:
Enter permissible probe for machining plane:
- For 840D sl - up to SW 1.x: Check the variables _TP[x,8] and _TPW[x,8] in GUD6
- For 840D sl/828D - as from SW 2.5: Check the setting data 54633 $SNS_MEA_TP_TYPE and/or 54648
$SNS_MEA_TPW_TYPE
or change the machining plane.
SINUMERIK 808D ADVANCED alarms
5.3 Cycle alarms
Diagnostics Manual
444
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
