Power-On and Power-Up
5.2 First power-up
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
125
Welcome to SINUMERIK !
These SINUMERIK products will be installed now:
<Application 1> <Version>
<Application n> <Version>
: :
: :
Install at NEXT REBOOT
Install NOW
CANCEL installing
Menu commands:
●
Install NOW
All the applications displayed will be installed in the listed order. During the installation
procedure follow the instructions that appear on the screen.
NOTICE
The PC may not be switched off during the entire installation process. Data loss!
●
Install on NEXT REBOOT
None of the listed applications are installed and you are taken to the Windows desktop.
The installation menu is displayed again the next time the PCU is booted.
●
CANCEL installation
None of the listed applications are installed.
Application:
Subsequent installation of a hard drive image as part of a standard commissioning.
NOTICE
The current installation menu will not be displayed the next time the PCU is booted. The
installation procedure which was cancelled with "Cancel installing" cannot be repeated
Completion
When installation is complete rebooting automatically starts. Once the PCU has booted
again, you can continue with the basic PLC commissioning (Section "Basic commissioning of
the PLC").
See also