NC Commissioning with HMI Advanced
11.5 Axes and spindles
Manual
446
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
●
MD10210 $MN_INT_INC_PER_DEG (computational resolution) = 1,000 [incr./degree]
●
MD31020 $MA_ENC_RESOL (encoder resolution) = 500 [pulses/revolution]
●
MD31050 $MA_DRIVE_AX_RATION_DENOM (load rev. denominator) = 1
●
MD31060 $MA_DRIVE_AX_RATION_NUMERA (load rev. numerator) = 1
●
MD31070 $MA_DRIVE_ENC_RATION_DENOM (load rev. denominator) = 1
●
MD31080 $MA_DRIVE_ENC_RATION_NUMERA (load rev. numerator) = 1
0'
0'
,QWHUQDO
UHVROXWLRQ
0'
0'
0'
GHJUHHV
0'SXOVHUHY
LQWLQFUHPHQWV
HQFRGHUSXOVH
,QWHUQDO
UHVROXWLRQ
One encoder increment corresponds to 5.625 internal increments.
One encoder increment corresponds to 0,005625 degrees (highest possible positioning
resolution).
Example B: encoder at motor
Suppose the following conditions are provided:
●
The incremental encoder is mounted on the motor.
●
Encoder pulses = 2048 [pulses/rev.]
●
Pulse multiplication = 128
●
Internal precision = 1000 [increment/degree]
●
Encoder gear stage = 1:1
●
Load gear stage 1= 2.5:1 [motor rev./spindle rev.]
●
Load gear stage 2= 1:1 [motor rev./spindle rev.]
Gear stage 1:
,QWHUQDO
UHVROXWLRQ
0'
0'
0'
0'
0'
GHJUHHV
0'SXOVHUHY
LQWLQFUHPHQWV
HQFRGHUSXOVH
,QWHUQDO
UHVROXWLRQ
One encoder increment corresponds to 0,54932 internal increments.
One encoder increment corresponds to 0.00054932 degrees (highest possible positioning
resolution).
