Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
3
Foreword
SINUMERIK documentation
The SINUMERIK documentation is organized in 3 parts:
●
General documentation
●
User documentation
●
Manufacturer/Service documentation
An overview of publications, which is updated monthly and also provides information about
the language versions available, can be found on the Internet at:
http://www.siemens.com/motioncontrol
Select the menu items "Support" → "Technical Documentation" → "Overview of Publications".
The Internet version of DOConCD (DOConWEB) is available at:
http://www.automation.siemens.com/doconweb
Information on the range of training courses and FAQs (frequently asked questions) are
available on the Internet under:
http://www.siemens.com/motioncontrol under menu item "Support".
Target group
This documentation is intended for manufacturers/end users of machine tools and production
machines who use SINUMERIK 840Di sl and SINAMICS S120.
Benefits
This manual provides detailed information required for the configuration and commissioning
of a SINUMERIK 840Di sl system.
This manual describes the control system design and the interfaces of the individual
components. The commissioning procedure for SINUMERIK 840Di sl (NCK, PLC and drives)
is also described.
For detailed information about individual functions, function assignment and performance
data of individual components, please refer to the appropriate document for the subject
concerned (e.g. manuals, description of functions etc.).
Separate documents are available for user-oriented activities. These include, for example,
generating part programs and handling controls.
Separate information is also available for operations that the machine tool manufacturer
must carry out. These include, for example, configuring/engineering, installation and
programming the PLC.
