06.03
10.5 Axes and spindles
10-375
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Speed
Max. encoder limit frequency
Max. spindle speed
Min. spindle speed of current gear stage
IS:
Axis/spindle stopped (n<nmin)
Speed range of spindle
Max. spindle speed of current gear stage
Programmable spindle speed limiting LIMS
Programmable minimum spindle speed G25
or spindle chuck
Speed range of current gear stage
Speed range of current gear stage
limited by G25 and G26
Speed range of current gear stage
with constant cutting rate G96 and G97
IS: Referenced/synchronized
Programmable spindle speed limitation G26
0
Max. velocity/speed “Axis/spindle stopped”
Fig. 10-32 Ranges of spindle monitoring functions/speeds
/FB1/
Description of Functions, Basic Machine,
S1 Spindles
Section: Spindle monitoring
References
10 NC Start-Up with HMI Advanced