06.03
10.10
NC/PLC diagnosis (840Di SW 2.3 and higher)
10-399
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
10.10.2 Menu: Settings
The menu for the SINUMERIK 840Di–specific settings is located under the foll-
woing operating path:
S
Operating area switchover > Diagnosis > NC/PLC Diagnosis > Settings
2560 KB RAM / HD non–volatilet
MPF0
Program aborted
ROV
CHAN1
AUTO
Start-up
Modify
Signal level
Channel RESET
Diagnostics
Settings
Settings
non–volatile user memory
Signal source
Signal input for shutdown behavior
deactivated
–
Fig. 10-38 Menu: Settings
On switchover to the menu, the data displayed are read–only. To modify the
data, first press the soft key: Modify.
The Settings group combines the following functions:
S
Non–volatile user memory
Use the list box to select the size of the non–volatile user memory:
Note
The siye of the SRAM memory area is displayed in the following machine data:
S
MD 18060: INFO_FREE_MEM_DYNAMIC (free static memory).
Operating path
Modifying data
Group: Settings
10 NC Start-Up with HMI Advanced