06.03
15.3 Data backup
15-482
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Following menu:
PLEASE SELECT
1
Set Connection Mode PARALLEL
2
Set Connection Mode LOCAL
3
Change Backup Image Filename
4
Change Restore Image Filename
5
Change Machine Name
6
Manage Network Drives
9
Back to previous Menu
Your Choice [1,2,3,4,5,6,9]?
Fig. 15-3 Main menu for configuring the Ghost parameters
S
To set the connection mode “Network Connection”, choose the menu item
Set Connection Mode LOCAL using the key “2”.
S
To set the network parameters of the PCU, choose the menu item Manage
Network Drives using the key “6”.
Following menu:
PLEASE SELECT:
1
Connect to Network Drive
2
Show Connected Network Drives
3
Disconnect from all Network Drives
9
Back to previous Menu
Your Choice [1,2,3,9] ?
Choose Connect to Network Drive using the key “1”.
–
Type the user name and the password you want to use for access to
the external computer using the network connection.
Windows NT 4.0
User name and password of the local user of the PG/PC
Windows 95
Any user name; if a password is required, type the password you have
specified to share access to the directories.
–
For later verification, you may be prompted to confirm saving of the
password.
–
Specify the drive letter under which the external drive is to be accessed
from the PCU (e.g. “H”).
–
DIRECTORY TO BE MOUNTED:
Please type a name of the computer and the access name of the drive/
directory of the external computer:
\\<COMPUTER NAME>\<SHARED AS>
e.g. \\R3344\MY_BACKUP
How to set or determine the network parameters of an external computer
is described in Subsection 15.1.4 (page 15-458).
The set network information is displayed.
15 SW Installation/Update and Data Backup
